Thermistor Replacement for Kingroon KP3S / Ender 3

100K NTC 3950 thermistor temperature sensor With XH2.54-2P Terminal.

1 meter / 39.4 inches length thermistor suitable for replacement of Creality Ender 3, Ender 3 Pro, CR-10, Kingroon KP3S, KP3S Pro, KP3S Pro S1 3D printers.

Specification

Single-ended glass-sealed thermistor
*Suggested Parameters:R25°C=100K B25/50=3950K(1%
*Resistance Accuracy: 1%，2%,3%.
B R25/50: (usual)
BAccuracy:1%.
*Thermistor size:3x20mm
*Temperature Range:-40C~+260°C
*Max Rated Power: 45mW.
*Resistance Temperature Coefficient:-2~-5%/
*Suggested Parameters: R25°C=100K B25/50=3950K(1%)

Note:
**This is Thermistor used on KP3S and KP3S Pro, KP3S Pro S1 3D printers. 
**also you can DIY with another 3d printer ; but at your own risk;

When would you need to replace your thermistor?

• Poor contact thermistor.
• Does not display room temperature when you do not pre-heat.
• The resistance value of the printer thermistor is not about 100kΩ (+-5kΩ). 
• Thermal runaway error: It is recommended to loosen the screw of the hotend block which fix the thermistor. If the fault disappears, it is the thermistor problem. If the fault still exists, it may be a motherboard problem.

Package includes:

Thermistor sensor replacement * 15PCS

OR

Thermistor sensor replacement * 1PCS

FREE shipping from our Chinese warehouse.

The picture is for reference only. Please adhere to the original products in case of any mistake.