Krajalnica ChituBox V1.8.1 do pobrania dla Kingroon KP6:
https://drive.google.com/drive/folders/1bpAK-LXldXMQx1BBfzPfRP9D2wzxMItq?usp=sharing
Modele testowe do POBRANIA dla Kingroon KP6 i Kingroon KP6 Plus:
https://drive.google.com/drive/folders/1YyPvp5t0l4qTHDOLlU6G-hIR5QyysFay?usp=sharing
KP6_all.cfg
맥 사용자입니다.
kp6 pro의 usb에서 stl 파일을 읽어오고 싶은데 vlr파일만 가능하네요, 치투박스에서는 vlr파일이 지원이 안 되는 것 같습니다. 프린터에서 stl 파일을 읽어오려면 어떻게 해야 되나요?
hi
I want to increase the maximum height of kp6 by 180mm more.
I changed the hardware but The software is limited to 180mm.
1. Chitubox changed Print Z size to 300 in profile
2. i changed Z maximu stroke to 300 by gcode file.
M8026 I300 ; z maxium stroke
but However, when printing, it stops at 180mm height and does not rise further.
Strangely, uvlignt lcd works at this time.
The uvlight lcd operates to the end, but the z axis motor stops at 180mm and no longer operates.
I want to make KP6 more useful
Please help me
My Kingroon Kp6 pro doesn’t see any sliced file, nor 1.91 nor 1.81 or anything else
Flash card with the printer contains 4 files, none of them are detected by the printer.
is there somewhere to go for support. i have yet to be able to use my printer as anyhing more than a paper weight. i see some third party utube stuff but i speak english. the info here is wrong and for some reason not updated even tho you are aware. the chitu slicer is new version but not able to be used….. but you have customers downloading it only to fail…. why do that?