Kingroon KP3S 3.0 Firmware-Download

Kommentare

minedgeekble - Dezember 26, 2021

I think the board broke during firmware update, but is it not repairable in Korea?

Kingroon Official - Dezember 23, 2021

@minedgeekble
Hi minedgeekble, you could get our mainboard on our official eshop:
https://kingroon.com/collections/kingroon-3d-printer-mainboard

minedgeekble - Dezember 22, 2021

Hello, I am a user who uses the Kingroon kp3s printer in Korea.
I’m inquiring because the circuit on the extruder side seems to have broken after the recent 3d touch firmware update.
We would appreciate it if you could help us replace the board only in Korea or how to solve it.

KINGROON Office - Dezember 22, 2021

@Joan
Reflash it once, extract the firmware to an empty SD card, insert the card and turn it on, you need to wait a few minutes for it to show the main interface, don’t be too anxious to pull the card.

KINGROON Office - Dezember 22, 2021

@미니들파파
To change to English, you don’t need to change inside the robin_nano_cfg2 file, just switch directly in the machine display page.

미니들파파 - Dezember 19, 2021

firmware 언어를 영문으로 바꾸어 주세요
robin_nano_cfg2 파일은 내용을 꼭 영문으로 바꾸어 주세요

Joan - Dezember 18, 2021

Hello I have the STM32 F103 MCU, I downloaded the f103 fimware and it crashed the black screen. What I can do? help

KINGROON Office - Dezember 17, 2021

@Tim Houser
Is there something wrong with your machine? Why do you need to update the firmware? Do you think it’s fun to flash the firmware? I’m not sure what’s wrong with you, but the suggestion is to buy a new KP3S motherboard, which comes with the latest version of the firmware.

Tim Houser - Dezember 17, 2021

@KINGROON Office you need to fix the link to the gd32 firmware. It points to the 407 firmware. Basically the 103 and gd links need to be the same and as of this reply they are still wrong. Please and thank you.

KINGROON Office - Dezember 16, 2021

@Luke
MCU GD32 F303 version firmware is used 103