United States (USD $)
Российская (RUB ₽)
Global (USD $)
Bambu Lab A1 Mini Hotend with Hardened Steel Nozzle
Bambu Lab A1 Mini Hotend with Hardened Steel Nozzle
Quick Swap Nozzle Design
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
Highlights of Various Nozzle Diameters
0.2mm
Nozzle
Optimal Print Fineness
Extremely small layer
gaps
More detailed on the
vertical print surface
0.2mm
Nozzle
Optimal Print Fineness
Smaller diameter
extrudes thin filaments
High
resolution on the horizontal print
surface
0.6mm and 0.8mm
Nozzle
Faster Print Speed
Larger diameter extrudes more filaments per second, resulting in faster print speed
The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in Bambu Lab A1 Series 3D printers.
Filament Compatibility
| Material | 0.2 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| PLA Sparkle | *NO | YES | YES | YES | Optional |
| PLA Marble | *NO | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| Bambu PLA-CF | *NO | *Highly Recommended | YES | YES | *Required |
| Bambu PETG-CF | *NO | *Highly Recommended | YES | YES | *Required |
[*Note]
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
- For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel0.6 mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Only 0.2mm In the Box
Stainless Steel Hotend 0.2 mm - A1 Mini *1
Only 0.4mm the Box
Hardened Steel Hotend 0.4 mm - A1 Mini *1
Only 0.6mm the Box
Hardened Steel Hotend 0.6 mm - A1 Mini *1
Only 0.8mm the Box
Hardened Steel Hotend 0.8 mm - A1 Mini *1
4 Set In the Box
1. Stainless Steel Hotend 0.2 mm - A1 Mini *1
2. Hardened Steel Hotend 0.4 mm - A1 Mini *1
3. Hardened Steel Hotend 0.6 mm - A1 Mini *1
3. Hardened Steel Hotend 0.8 mm - A1 Mini *1
4. Hotend Silicone Sock - A1 Mini *3
Compatibility
A1 Mini
