Pobieranie oprogramowania sprzętowego Kingroon KP3

buenas, con la ultima actualización se ha invertido el extrusor, hay alguna solución
gracias

Hi, I want to upgrade my kp3s (red extruder) with a titan extruder, Do I need a new firmware or just modify the txt file with the correct E0 steps (764) and flash it?. In that case, is it just modify the robin_nano_cfg.txt and boot the printer with a SD with the file?
Thanks

@chrit Sorry for the problem. Please check the firmware files, the problem can be fixed by modifying the text file in it. Just modify the related setting and flash the text file. Thanks!

Since Latest frimware update it is again reversed all directioons on KP3S 2.0 RED
the extrusion calibration and travel steps are also wrong.

XYZ need invertion and all Steps are off by 1.98x

You bricked the device by releasing a buggy firmware

Since Latest frimware update it is again reversed all directioons on KP3S 2.0 RED
the extrusion calibration and travel steps are also wrong.
You bricked the device by releasing a buggy firmware