Oprogramowanie sprzętowe Kingroon KP3S Pro do pobrania

Hello, where can I download the stock firmware of the KP3S Pro ?

My KP3S PRO S1 does not recognize the STL file input to TF CAD. Please tell me why and how to solve this problem.

My KP3S PRO S1 does not recognize the STL file input to TF CAD. Please tell me why and how to solve this problem.

Hello, i don’t know how if it’s available the working firmware for 3dTouch and filament change for the KP3S Pro 3d printer officially made for you and a detailed tutorial/guide to do this procedure in home.

Hello, we have set up printer. It turned on fine, we started our first print.
Then after about an hour, halfway through the print, all of a sudden in the middle of the print, it just stopped. They waited a while and then finally turned it off and back on. The screen said LOADING for a long while, and then flashed to the normal info screen for a split second, and then went blank. This was repeated 3x now with same result. If just says loading for the longest time, flashes to the normal screen, and then goes blank. We have unplugged and plugged back in as many connections as we can find. We have also reformatted the flash drive that came with the printer. What do I do next? The screen just goes to blank every time if flash drive is plugged in or not.