Kingroon KP3S 3.0 Firmware-Download

Comentarios

Paul - agosto 13, 2022

Because of trouble with Octoprint on the KP3S (GD32F303) I flashed the new firmware. While it seems to have solved the problem with Octoprint, now in the touch screen settings menu (ReadyPrint>Set)
there is no longer a ‘About’ pictogram but instead it says ‘Open/Close’.
Is that on purpose? And if so, what does it do?

Matheus - agosto 12, 2022

The links are missing the mks_font, mks_pic for proper LCD work, just the Robin_nano.bin file is provided.

JohnC - mayo 3, 2022

So how do I un brick my motherboard? Since I apparently used the wrong firmware from the links above which I don’t think was my fault because the links above seem to be the same for the different boards.

MRunar - abril 26, 2022

I believe you have to install this first""
https://drive.google.com/file/d/1kPQxm5T_yYI69wms1M1YTskTk_kCHVkX/view?fbclid=IwAR2ctKDDY0_13oM1lmBTmm64LVbSZ03Nk32A02AtxOQXxI46-wlOORN-vvc
Then you would install the latest robin nano from here""
https://drive.google.com/drive/folders/148kOcuvHB6rcBEDIMgvJfA70DLtkQgsS
I believe this would fix most problems, if not ,, then pick up some files from this link""
https://github.com/bdwilson/KP3S/tree/main/files

Hyun-Kook Yeo - abril 23, 2022

I am using KP3S 3.0 (GD32F303), and I want to uninstall 3Dtouch after installing it. Auto leveling appears instead of Leveling on the LCD menu of the printer even when recording again with the stock firmware.

I am curious how to do it. And obviously, the contents that were applied to the cfg file will remain, and it would be nice if a cfg file suitable for the stock firmware was also provided.

park sang bok - abril 7, 2022

When will the kingroon kp3 bltouch stm32 f407 firmware come out?

Martn - marzo 30, 2022

After the last firmware upgrade (2022.3.12) the printer starts printing really bad. There is problem with Z-axis. During the print it does not lift Z-axis enought and start to make ditch in the lower layer. Before the update there is no such problem.

Felix - marzo 21, 2022

Any update realease notes for the new firmware?

Alexendr - enero 31, 2022

Исправьте ссылку прошивки GD32F303 !!! По прежнему некорректная ссылка!

Martin - enero 21, 2022

is the bltouch firmware different to all other firmwares accept the robin_nano_cfg.txt ?