Kingroon KP3S 3.0 Firmware-Download

Comentarios

Martin - enero 21, 2022

is the bltouch firmware different to all other firmwares accept the robin_nano_cfg.txt ?

Kingroon Official - enero 18, 2022

@silvio greiner
Hi Silvio Greiner,
You could get our BL Touch installation tutorial on the following blog:
https://kingroon.com/blogs/downloads/kingroon-kp3s-bltouch-installation

Lars - enero 17, 2022

Good day,
is there still a reaction from the support or do you have to do something else? under customer service there seem to be different views!

Kingroon Official - enero 17, 2022

@Константин
Hi Константин, sorry for the error. We have corrected the link.

Kingroon Official - enero 17, 2022

@Lukas
Hi Lukas,
Thank you for your reminding. We have edited the links.

Константин - enero 17, 2022

!!! Исправьте ссылку прошивки GD32F303 !!! По прежнему некорректная ссылка!

silvio greiner - enero 15, 2022

hallo ich habe einen Kingroon KP3S 3.0 mit MCU GD32 F303 Firmware . wie installiere ich den bl touch ? gibt es eine anleitung ?

Lukas - enero 7, 2022

Hi Guys, you have
wrong link for Kingroon KP3S 3.0 with MCU GD32 F303 firmware to DOWNLOAD.
https://drive.google.com/file/d/1NpmVarxYn9-mx53_lw-Stun6iQ9b2OoU/view

This is the same link like for
Kingroon KP3S 3.0 with MCU STM32 F407 firmware to DOWNLOAD.
https://drive.google.com/file/d/1NpmVarxYn9-mx53_lw-Stun6iQ9b2OoU/view

OMG

Repair IT!!!!

Lars - enero 6, 2022

@kingroon Office: I heated up the nozzle and fed filament. Almost 10mm is missing and I wanted to fix that. Do not get a real flow, brim or the like.

Lars - enero 5, 2022

Hello, thanks for your help. These are M501 data that my Kingroon spat out:

Connecting…
Printer is now online.
>>> M501
SENDING:M501
echo:V47 stored settings retrieved (600 bytes; crc 25687)
echo: G21 ; Units in mm
echo:Filament settings: Disabled
echo: M200 D3.00
echo: M200 T1 D3.00
echo: M200 D0
echo:Steps per unit:
echo: M92 X160.00 Y160.00 Z800.00
echo: M92 T0 E766.00
M92 T1 E98.00
echo:Maximum feedrates (units/s):
echo: M203 X200.00 Y200.00 Z4.00
echo: M203 T0 E100.00
M203 T1 E100.00
echo:Maximum Acceleration (units/s2):
echo: M201 X1000 Y1000 Z100
echo: M201 T0 E1000
M201 T1 E1000
echo:Acceleration (units/s2): P R T
echo: M204 P1000.00 R1000.00 T1000.00
echo:Advanced: S T B X Z E
echo: M205 S0.00 T0.00 B20000 X15.00 Y15.00 Z0.40 E5.00
echo:Home offset:
echo: M206 X0.00 Y0.00 Z0.00
echo:Hotend offsets:
echo: M218 T1 X20.00 Y5.00
echo: M420 S0
echo:Endstop adjustment:
echo: M666
echo:PID settings:
echo: M301 P24.00 I0.88 D80.00
echo:Z-Probe Offset (mm):
echo: M851 Z0.00

Which command do I have to change so that my filament flow is correct?
What kind of firmware is it? Is that marlin?