• August 13, 2023 Kingroon 3D

    "Material Interlocking" of Cura Slicer 5.3

    New version of Cura 5.3 came out. There's stuff worth seeing in this one, especially if you have a multi material capable 3D printer! The interlocking structure in Cura 5.3 combines two different material types. The idea behind interlocking structures is Cura...

    Read now
  • June 25, 2023 Kingroon 3D

    Mods and Upgrades for Bambu Lab X-1 Carbon 3D Printer

    In this article there are some recommended upgrades and modifications, mostly 3D printed modifications, to Bambu Lab X-1 Carbon 3D printer. From accepting a wider range of filament spools to easily swapping away from using the AMS, shining a little light on...

    Read now
  • May 6, 2023 Kingroon 3D

    Kingroon KLP1 3D Printer Assembly Guide

    Kingroon KLP1 3D Printer Assembly Step 1 Use scissors to remove the fixed straps from the belt.   Step 2 Use M3 * 6 screws to fix the filament holder on the back of the machine, use M3 * 18 screws...

    Read now
  • July 3, 2022 Kingroon 3D

    Kingroon KP6 LCD Resin 3D Printer Upgrades

    Kingroon KP6 is a resin 3D printer with a 2K monochrome LCD. It has a build volume of 82*129*180mm and prints with great precision and high quality. In this article, we'll follow the guidance of the Maker Wookie's YouTube channel...

    Read now
  • March 12, 2022 Kingroon 3D

    Kingroon KP5L Firmware to Download

    Kingroon KP5L (half-assembled version) stock firmware to DOWNLOAD. Kingroon KP5L (full diy version) stock firmware to DOWNLOAD. This is Marlin firmware that need you to compile. 

    Read now