3D Print 101

  • October 16, 2022 Kingroon 3D

    DIY A Budget 3D Printer Filament Dry Box

    Filament dry box is certainly a necessary tool to keep filament dry. And dry filament is an important factor to carry out a successful 3D print. Step by step, we can make a budget 3D printer filament dry box on our own.
    Read now
  • September 20, 2022 Kingroon 3D

    Best Quality Settings in Cura for KP3S Pro

    Recently we released the brand-new model, the KP3 Pro 3D printer. Obviously, it is the upgraded version of the KP3S model. It has a 200x200x200mm print volume, linear guide rails on the X-axis and Z-axis, a filament sensor, and a...

    Read now
  • August 27, 2022 Kingroon 3D

    Tips to Prevent 3D Print Stringing & Blobs

    3D printing stringing and blobs are quite common issues and can be caused by various factors especially print settings rather than the printer itself. Now let's start from what 3D printing stringing and blobs are, and then get into the...

    Read now
  • August 24, 2022 Kingroon 3D

    How to get Klipper Screen in 5 Minutes

    For those who are using Klipper firmware, the black screen seems to be a huge problem. How to access the printer without keeping the computer opening?Today let’s show you how to get a “Klipper Screen” in 5 Seconds. First, if...

    Read now
  • August 24, 2022 Kingroon 3D

    How to Set Up Kingroon KP3S Marlin Firmware

    Marlin is one of the best and most powerful 3D printer firmware. It is also available for the Kingroon KP3S 3D printer. Today we will show you how to build Marlin firmware for your KP3S and set it up.* Before...

    Read now
  • June 4, 2022 3DKingroon

    How to Connect Ender 3 to PC

    If you're a heavy user of a 3D printer, you're likely to get tired of printing via an SD card. Every time when you start a new print,  you repeat the same annoying procedures. Take out the SD card from...

    Read now
  • May 31, 2022 Kingroon 3D

    How to Fix 3D Printer Not Reading SD Card?

    Many users may confront with Creality Ender 3 not reading SD card while printing. This can also happen on any other 3D printers. And the reasons can be quite different, and sometimes, trivial matters tend to be ignored especially by...

    Read now