Downloads

Packaging List of Kingroon KP5L 3D Printer Assembly Instruction of Kingroon KP5L DIY Version Step 1. Fix the two Z-axis on the bottom panel with M5*20 screws, as show below.    Step 2. Take the top aluminum part and the...

Kingroon KP5M X/Z Axis Assembly Put the X/Z axis vertically on the Kingroon KP5M printer base. (as shown in the picture) Tighten and secure X/Z axis to the printer base from the printer bottom using four M5*35 screws.  Cable Connection...