Install BLTouch Leveling Sensor on Kingroon KP5L (Firmware Download)

Upgrade your Kingroon KP5L (Full DIY version) 3D printers or Kingroon KP5L (Half-assembled Version) 3D printers with BL Touch or 3D Touch auto leveling sensor. 

First, get the printable fix frame for the BLTouch, which you could install the BLTouch on the extruder head. 

KINGROON KP5M BLTouch

 

Secure Cables for BLTouch

The limit switch for the leveling cable is for Zmax place and the position of the black and write cable can't be switched. The write cable is for S. The black cable is for G. As shown in the following picture. 

The cable for the motor also need to follow the right position as shown in the picture below. 

kingroon kp5m bltouch installation

Firmwares for Kingroon KP5L BLTouch Upgrade 

Get the .bin firmware modified for BLTouch upgrade for your Kingroon KP5L (FULL DIY VERSION) 3D printer

Get the .bin firmware modified for BLTouch upgrade for your Kingroon KP5L (HALF ASSEMBLED VERSION) 3D printer.

 

kingroon kp5l pro

Save the .bin formate firmware on your TF card and upgrade on your Kingroon KP5L printer.  

Adjust the Default Leveling Position

Previous article Flexible filament, TPU, Print on Kingroon KP3S 3D Printer
Next article First Print Settings on Kingroon KP5M 3D Printer

Comments

Jigzila - April 6, 2022

@Kingroon

I started to Look for the stock firmware, but what I found on your website still needed to be compiled; ie I was not able to find a .bin file to return to the stock firmware. Can you direct me to a .bin file for the stock firmware?

In addition, could you provide documentation on how to better configure the 2.0 firmware? I was hoping to configure the printer so it would do two probes for my 3D Touch, not just one.

Kp5l full diy

Kingroon 3D Official - April 4, 2022

@jigzila
We’re so sorry to hear that. Would you pls return the stock firmware and then try again?

jigzila - March 25, 2022

I am getting a “no data” error after upgrading the firmware for the 3d touch; Icons are shown as a white square with “no data.” Anyone else have this issue?

Kingroon 3D official - March 19, 2022

@Julius
May I know your KP5L is full DIY or half assembled version?

Kingroon 3D official - March 19, 2022

@Takechan
Here is: https://drive.google.com/drive/folders/1m5vcFRbmSvDLUG381B0w0QDiaa2BqEB4?usp=sharing

Kingroon 3D official - March 19, 2022

@MM
May I know your KP5M is full DIY or half assembled version?

Kingroon 3D official - March 19, 2022

@jun
You could download here: https://kingroon.com/blogs/downloads/kingroon-kp5l-firmware-to-download

Takechan - March 13, 2022

How about KP5S?

MM - March 13, 2022

Will this work for the KP5M?

jun - March 7, 2022

Firmware upgrade failed.
Original firmware required.
I want to go back to the original firmware.

Leave a comment

* Required fields