Kingroon KP3 Firmware Download

Comments

Marcos - July 3, 2022

buenas, con la ultima actualización se ha invertido el extrusor, hay alguna solución
gracias

Pablo - July 2, 2022

Hi, I want to upgrade my kp3s (red extruder) with a titan extruder, Do I need a new firmware or just modify the txt file with the correct E0 steps (764) and flash it?. In that case, is it just modify the robin_nano_cfg.txt and boot the printer with a SD with the file?
Thanks

Kingroon 3D Official - May 24, 2022

@chrit Sorry for the problem. Please check the firmware files, the problem can be fixed by modifying the text file in it. Just modify the related setting and flash the text file. Thanks!

chrit - May 22, 2022

Since Latest frimware update it is again reversed all directioons on KP3S 2.0 RED
the extrusion calibration and travel steps are also wrong.

XYZ need invertion and all Steps are off by 1.98x

You bricked the device by releasing a buggy firmware

chrit - May 22, 2022

Since Latest frimware update it is again reversed all directioons on KP3S 2.0 RED
the extrusion calibration and travel steps are also wrong.
You bricked the device by releasing a buggy firmware

Kingroon 3D Official - May 20, 2022

Robert DeFinis Sorry for what happened, please send an email with videos and photos to supportkingroon.com, our guy will help you out soon.

Before that, please download the stock firmware and flash it, to see if the problem is solved.

As you mentioned that you have a problem with using Cura, please download our profile and take a try, to see if it is OK to fix the problem.
https://drive.google.com/drive/folders/1d4jMTTvpHX9CZCqNjWOF9CRNJzqmO5q2?usp=sharing

Kingroon 3D Official - May 20, 2022

jorge manuel Please send an email to supportkingroon.com, our guy will find the file and send it to you. Thanks!

Kingroon 3D Official - May 20, 2022

경주이씨이상진 If you have any questions, please feel free to send an email with videos or photos to supportkingroon.com, our guy will help you out soon.

Robert DeFinis - May 14, 2022

Hi, I bought this 3D printer and I can not get it to work. I tried printing the guardian and the food clip and they lay out the first 1 or 2 lines and then it stops printing. I tried re- downloading the files on the SD card and it doesn`t help. I purchased new printing nozzles 0.4 steel ones, that helped at first, but it`s back to not printing. I went through the SD card and the Kingroon says their are no files. the guardian is starting to print, but it lays out the first lines, then the rest doesn`t print or its a little stringy then it doesn`t print at all. I need to fix this, the software says ,EMPTY, no files found. it ruined one of the magnetic pads on the printer, I bought a pair of new ones, had to tape the corners to keep it in place this time. I leveled the plate many times. The extruder clicks pretty loud when dispensing the PLA filament. it is a black one. I am running Windows 10. I also bought an ORBBEC ASTRA scanner. I don`t see anywhere in the Cura app to add a handheld scanner. I checked the software on the SD card and it says file is empty. I had to download Cura from the internet. it is 5.0.0 can someone help me get this Kingroon printer to work on my computer ? it`s been at least a week, and I haven`t been able to get any software to work here.
Thanks, Rob

jorge manuel - May 5, 2022

boa tarde amigo
estou com um problema eu comprei esta impressora marca kingroon kp6 3d resina
eu perdi ou firmware da pendraive agora nao sei ou que fazer ja fiz de tudo ha procura do firmware e nao consigo encontrar Web Site: www.kingroon.com
mesmo assim nao encontro tambem gostaria de saber como eu gravo imagen no formato stl / CTB FORMATO
AGUARDO SUA RESPOSTA OBRIGADO