Thermistor Replacement for Kingroon KP3S / Ender 3
100K NTC 3950 thermistor temperature sensor With XH2.54-2P Terminal.
Single-ended glass-sealed thermistor
*Suggested Parameters:R25°C=100K B25/50=3950K(1%
*Resistance Accuracy: 1%，2%,3%.
B R25/50: (usual)
*Max Rated Power: 45mW.
*Resistance Temperature Coefficient:-2~-5%/
*Suggested Parameters: R25°C=100K B25/50=3950K(1%)
**This is Thermistor used on KP3S and KP3S Pro, KP3S Pro S1 3D printers.
**also you can DIY with another 3d printer ; but at your own risk;
When would you need to replace your thermistor?
- Poor contact thermistor.
- Does not display room temperature when you do not pre-heat.
- The resistance value of the printer thermistor is not about 100kΩ (+-5kΩ).
- Thermal runaway error: It is recommended to loosen the screw of the hotend block which fix the thermistor. If the fault disappears, it is the thermistor problem. If the fault still exists, it may be a motherboard problem.
Thermistor sensor replacement * 15PCS
Thermistor sensor replacement * 1PCS
FREE shipping from our Chinese warehouse.
The picture is for reference only. Please adhere to the original products in case of any mistake.