• enero 21, 2022 Kingroon 3D

    Add Laser Head on Kingroon KP3S 3D Printer

    We will show you how to turn your Kingroon KP3S 3D printer into a powerful laser machine, so that you can switch its mode to carve things anytime. And it is quite easy, what you need to do is buying...

    Read now
  • enero 18, 2022 Kingroon 3D

    Kingroon KP3S BLTouch Installation

    To install BL Touch leveling sensor on Kingroon KP3S 3D printer, we would recommend you to use it based on Marlin firmware.  Kingroon KP3S BLTouch Mount BL Touch Wiring to the Mainboard Plug BLTouch wires into the corresponding ports...

    Read now
  • enero 13, 2022 Kingroon 3D

    Kingroon KP5L Assembly Manual

    Packaging List of Kingroon KP5L 3D Printer Assembly Instruction of Kingroon KP5L DIY Version Step 1. Fix the two Z-axis on the bottom panel with M5*20 screws, as show below.    Step 2. Take the top aluminum part and the...

    Read now
  • diciembre 20, 2021 Kingroon 3D

    First Print Settings on Kingroon KP5M 3D Printer

    Kingroon KP5M Bed Leveling Step 1. Click "Leveling" to adjust the distance between the nozzle and heatbed.  Step 2. Adjust the height of the Z-axis limit switch to set the distance between the nozzle and the platform.  Step 3. Adjust...

    Read now
  • diciembre 16, 2021 Kingroon 3D

    Assembly Manual of Kingroon KP5M 3D Printer

    Kingroon KP5M X/Z Axis Assembly Put the X/Z axis vertically on the Kingroon KP5M printer base. (as shown in the picture) Tighten and secure X/Z axis to the printer base from the printer bottom using four M5*35 screws.  Cable Connection...

    Read now