Oprogramowanie sprzętowe Kingroon KP3S Pro do pobrania

Oprogramowanie sprzętowe dla KINGROON KP3S Pro .

Pamiętaj, aby sflashować wszystkie pliki razem w przypadku wersji krzyżowej. 

(Będzie dostępny niedługo)

Poprzedni artykuł Instrukcja montażu drukarki 3D Kingroon KLP1
Następny artykuł Jak skonfigurować Klipper w drukarkach 3D KINGROON KP5L


언제성 - marzec 10, 2024

My KP3S PRO S1 does not recognize the STL file input to TF CAD. Please tell me why and how to solve this problem.

언제성 - marzec 10, 2024

My KP3S PRO S1 does not recognize the STL file input to TF CAD. Please tell me why and how to solve this problem.

Fernando - styczeń 14, 2024

Hello, i don’t know how if it’s available the working firmware for 3dTouch and filament change for the KP3S Pro 3d printer officially made for you and a detailed tutorial/guide to do this procedure in home.

Lara - wrzesień 13, 2023

Hello, we have set up printer. It turned on fine, we started our first print.
Then after about an hour, halfway through the print, all of a sudden in the middle of the print, it just stopped. They waited a while and then finally turned it off and back on. The screen said LOADING for a long while, and then flashed to the normal info screen for a split second, and then went blank. This was repeated 3x now with same result. If just says loading for the longest time, flashes to the normal screen, and then goes blank. We have unplugged and plugged back in as many connections as we can find. We have also reformatted the flash drive that came with the printer. What do I do next? The screen just goes to blank every time if flash drive is plugged in or not.

ardi69 - czerwiec 8, 2023

@Frustraded User works. But after about 1 hour of printing, the printer beeeeps and restarts. I am frustrated too.

Jos - czerwiec 4, 2023

Hi folks,
I just bought a KP3S PRO, so I’m new to this.
Can someone tell me where to find the latest firmwares please ?
Is there a version that supports 3D and/or Laser printing using an additional Laserhead ?
Your reaction will be highly appreciated, thanks,

Frustraded User - maj 10, 2023

This is a working marlin firmware 2.1 for Kingroon K3PS Pro S1 with BLTouch using GD32F303 Chip https://filehorst.de/d/ecytvjHF

Lucio Martinez - kwiecień 14, 2023

Funciona para la KP3S PRO S1?

Denis - kwiecień 11, 2023

Прошил v1.01.0712.22-20230411T055011Z-001 в KP3S PRO, однако как и раньше, при печати обороты вентилятора обдува сопла показывает только 0 и 100%, промежуточные значения не показывает!

Andrew - kwiecień 9, 2023

All sorted now. Had to use a micro SD card less than 8gb e.g. 4gb

zostaw komentarz

* Wymagane pola