United States (USD $)
Российская (RUB ₽)
Global (USD $)
Kingroon KP3S Stock Firmware
There are three kinds of MCU of Kingroon KP3S 3D printer mainboard, STM32 F407, GD32 F303, STM32 F103. Before you flash your firmware please double confirm your MCU verison. Wrong version flashed would brick your mainboard.
NOTE: KP3S 3.0 mainboard MCU GD32 F303 and KP3S 3.0 mainboard MCU STM32 F103 use the same firmware.
Kingroon KP3S 3.0 with MCU GD32 F303
Kingroon KP3S 3.0 with MCU GD32 F303 firmware to DOWNLOAD. (Updated on 2022.3.12)
Get Kingroon KP3S 3.0 mainboard MCU GD32 F303 with stock firmware flashed HERE.
Get Kingroon KP3S 3.0 mainboard MCU GD32 F303 with Marlin firmware flashed HERE.
Kingroon KP3S 3.0 with STM32 F103
Kingroon KP3S 3.0 with MCU STM32 F103 firmware to DOWNLOAD. (Updated on 2022.3.12)
Get Kingroon KP3S 3.0 mainboard MCU STM32 F103 with stock firmware flashed HERE.
Get Kingroon KP3S 3.0 mainboard MCU STM32 F103 with Marlin firmware flashed HERE.
Kingroon KP3S 3.0 with STM32 F407
Kingroon KP3S 3.0 with MCU STM32 F407 firmware to DOWNLOAD.
Kingroon KP3S 3.0 BLTouch Firmware
Kingroon KP3S 3.0 with BLTouch leveling sensor modification firmware to DOWNLOAD. BLTouch installion on Kingroon KP3S 3D printer tutorial available on our blog as well.
KP3S 3D Touch Firmware(STM32F103/GD32F303) V1.0.7_2022.05.17(Latest): Download
Kingroon KP3S 3.0 Laser Head Firmware
Kingroon KP3S 3.0 with laser head modification firmware to DOWNLOAD. Tutorial of adding laser head for our Kingroon KP3S.
never trust in this brand, never honor their promises… left all with the 407 chip with any update.. brought it thinking i will get updates as the other chips, and nothing after several years…
после прошивки стали глючить иконки
Тоже пропали иконки после прошивки и возрат на сток. Как-то решили проблему ?
Тоже пропали иконки после прошивки и возрат на сток. Как-то решили проблему ?
Тоже пропали иконки после прошивки и возрат на сток. Как-то решили проблему ?