United States (USD $)
Российская (RUB ₽)
Global (USD $)
Kingroon KP3S Stock Firmware
There are three kinds of MCU of Kingroon KP3S 3D printer mainboard, STM32 F407, GD32 F303, STM32 F103. Before you flash your firmware please double confirm your MCU verison. Wrong version flashed would brick your mainboard.
NOTE: KP3S 3.0 mainboard MCU GD32 F303 and KP3S 3.0 mainboard MCU STM32 F103 use the same firmware.
Kingroon KP3S 3.0 with MCU GD32 F303
Kingroon KP3S 3.0 with MCU GD32 F303 firmware to DOWNLOAD. (Updated on 2022.3.12)
Get Kingroon KP3S 3.0 mainboard MCU GD32 F303 with stock firmware flashed HERE.
Get Kingroon KP3S 3.0 mainboard MCU GD32 F303 with Marlin firmware flashed HERE.
Kingroon KP3S 3.0 with STM32 F103
Kingroon KP3S 3.0 with MCU STM32 F103 firmware to DOWNLOAD. (Updated on 2022.3.12)
Get Kingroon KP3S 3.0 mainboard MCU STM32 F103 with stock firmware flashed HERE.
Get Kingroon KP3S 3.0 mainboard MCU STM32 F103 with Marlin firmware flashed HERE.
Kingroon KP3S 3.0 with STM32 F407
Kingroon KP3S 3.0 with MCU STM32 F407 firmware to DOWNLOAD.
Kingroon KP3S 3.0 BLTouch Firmware
Kingroon KP3S 3.0 with BLTouch leveling sensor modification firmware to DOWNLOAD. BLTouch installion on Kingroon KP3S 3D printer tutorial available on our blog as well.
KP3S 3D Touch Firmware(STM32F103/GD32F303) V1.0.7_2022.05.17(Latest): Download
Kingroon KP3S 3.0 Laser Head Firmware
Kingroon KP3S 3.0 with laser head modification firmware to DOWNLOAD. Tutorial of adding laser head for our Kingroon KP3S.
@Shawn
The machine can print normally without updating the firmware. Other slicing software is also possible.
@Marty
It uses version 103 firmware. The machine does not need to update the firmware if other things are not changed.
@Tim Houser Hi, yes, the firmware of 3Dtouch is compatible with two chips
I think for ones using GD chip should download the one with STM103 one. Just look at the name of the files in Google Drive. “KP3S-Firmware-20210726stm103gd32.zip”.
Try on your own risk.. Im not responsible if anything gone bad. Just my 2c
How can there be two different firmwares for different chips yet only one version for bltouch? Wouldn’t there need to be different bltouch firmwares as well?