Upgraded V2.0 For Bambu Hotend CHT Nozzle Bambulab X1c Bambu Lab P1p / P1s Hotend High Flow Bi Metal
Upgraded 2.0 Hot End for Bambu Lab1 p1p
320℃: Overall Maximum Temperature
Use the TZ 2.0 hot end print flow up to 35mm³/s
Small size lightweight: Aluminum radiator with integrated pipe heating block and replaceable threaded nozzle.
Titanium alloy screw fixation: The heating block is connected to the radiator by two titanium alloy screws to avoid bending and breaking and breaking of the pipe during high-speed printing.
Official version: Easy to bend and break
Upgrade version: Not easy to bend and break
Add chrome-zirconium copper: Adding a chrome zirconium copper surround to the heat break Better heat dissipation.
One-piece interference fit between heat break and heating block: The structure of the heat break is upgraded and the step limit is added at the cooperation with the heating block to solve the phenomenon of material leakage and the phenomenon of shedding.
Heating block nozzle upgrade:
The heating block is upgraded to chrome-zirconium copper nickel plating treatment, high-temperature printing resistance, and fast heat conduction.
The nozzle is made of hardened steel SKD11 after quenching and hardening treatment, 550 degrees above, more wear-resistant, prolonging the service life.
Nozzle structure upgrade: Adopt threaded connection between heating block and heat break to solve the phenomenon of falling off, and can be disassembled and replaced to reduce the cost of use.
Heat break and nozzle inner wall roughness Ra 0.4: Reduce plugging phenomenon and improve print quality.
Top screw holds the heat break: The radiator and the heat break are fixed by the top wire, the connection is stable, and can be removed and replaced to reduce the use cost.