Oprogramowanie sprzętowe Kingroon KP3S
Istnieją trzy rodzaje MCU płyty głównej drukarki 3D Kingroon KP3S : STM32 F407, GD32 F303, STM32 F103. Przed sflashowaniem oprogramowania sprzętowego proszę dwukrotnie potwierdzić wersję MCU. Sflashowana niewłaściwa wersja może spowodować uszkodzenie płyty głównej.
NOTATKA: Płyta główna KP3S 3.0 MCU GD32 F303 i Płyta główna KP3S 3.0 MCU STM32 F103 korzysta z tego samego oprogramowania sprzętowego.
Kingroon KP3S 3.0 z MCU GD32 F303
Kingroon KP3S 3.0 z MCU GD32 F303 oprogramowanie do POBIERAĆ . (Aktualizacja 2022.03.12)
Zdobądź płytę główną Kingroon KP3S 3.0 MCU GD32 F303 z fabrycznym oprogramowaniem wgranym TUTAJ .
Pobierz płytę główną Kingroon KP3S 3.0 MCU GD32 F303 z oprogramowaniem Marlin wgranym TUTAJ .
Kingroon KP3S 3.0 z STM32 F103
Kingroon KP3S 3.0 z oprogramowaniem MCU STM32 F103 do POBRANIA . (Aktualizacja 2022.03.12)
Zdobądź płytę główną Kingroon KP3S 3.0 MCU STM32 F103 z fabrycznym oprogramowaniem wgranym TUTAJ .
Zdobądź płytę główną Kingroon KP3S 3.0 MCU STM32 F103 z wgranym oprogramowaniem Marlin TUTAJ .
Kingroon KP3S 3.0 z STM32 F407
Kingroon KP3S 3.0 z oprogramowaniem MCU STM32 F407 do POBRANIA .
Oprogramowanie sprzętowe Kingroon KP3S 3.0 BLTouch
Kingroon KP3S 3.0 z modyfikacją oprogramowania czujnika poziomowania BLTouch do POBRANIA . Poradnik dotyczący instalacji BLTouch na drukarce 3D Kingroon KP3S dostępny jest również na naszym blogu.
Oprogramowanie sprzętowe KP3S 3D Touch (STM32F103/GD32F303) V1.0.7_2022.05.17 (najnowsze): Pobierz
Oprogramowanie sprzętowe głowicy laserowej Kingroon KP3S 3.0
Kingroon KP3S 3.0 z oprogramowaniem modyfikującym głowicę laserową do POBRANIA . Tutorial dodawania głowicy laserowej do naszego Kingroona KP3S .
So how do I un brick my motherboard? Since I apparently used the wrong firmware from the links above which I don’t think was my fault because the links above seem to be the same for the different boards.
I believe you have to install this first""
https://drive.google.com/file/d/1kPQxm5T_yYI69wms1M1YTskTk_kCHVkX/view?fbclid=IwAR2ctKDDY0_13oM1lmBTmm64LVbSZ03Nk32A02AtxOQXxI46-wlOORN-vvc
Then you would install the latest robin nano from here""
https://drive.google.com/drive/folders/148kOcuvHB6rcBEDIMgvJfA70DLtkQgsS
I believe this would fix most problems, if not ,, then pick up some files from this link""
https://github.com/bdwilson/KP3S/tree/main/files
I am using KP3S 3.0 (GD32F303), and I want to uninstall 3Dtouch after installing it. Auto leveling appears instead of Leveling on the LCD menu of the printer even when recording again with the stock firmware.
I am curious how to do it. And obviously, the contents that were applied to the cfg file will remain, and it would be nice if a cfg file suitable for the stock firmware was also provided.
When will the kingroon kp3 bltouch stm32 f407 firmware come out?
After the last firmware upgrade (2022.3.12) the printer starts printing really bad. There is problem with Z-axis. During the print it does not lift Z-axis enought and start to make ditch in the lower layer. Before the update there is no such problem.