United States (USD $)
Российская (RUB ₽)
Global (USD $)
Upgrade your Kingroon KP5L (Full DIY version) 3D printers or Kingroon KP5L (Half-assembled Version) 3D printers with BL Touch or 3D Touch auto leveling sensor.
First, get the printable fix frame for the BLTouch, which you could install the BLTouch on the extruder head.
Secure Cables for BLTouch
The limit switch for the leveling cable is for Zmax place and the position of the black and write cable can't be switched. The write cable is for S. The black cable is for G. As shown in the following picture.
The cable for the motor also need to follow the right position as shown in the picture below.
Firmwares for Kingroon KP5L BLTouch Upgrade
Get the .bin firmware modified for BLTouch upgrade for your Kingroon KP5L (FULL DIY VERSION) 3D printer.
Save the .bin formate firmware on your TF card and upgrade on your Kingroon KP5L printer.
@Kingroon
I started to Look for the stock firmware, but what I found on your website still needed to be compiled; ie I was not able to find a .bin file to return to the stock firmware. Can you direct me to a .bin file for the stock firmware?
In addition, could you provide documentation on how to better configure the 2.0 firmware? I was hoping to configure the printer so it would do two probes for my 3D Touch, not just one.
Kp5l full diy
@jigzila
We’re so sorry to hear that. Would you pls return the stock firmware and then try again?
I am getting a “no data” error after upgrading the firmware for the 3d touch; Icons are shown as a white square with “no data.” Anyone else have this issue?
@Julius
May I know your KP5L is full DIY or half assembled version?
@Takechan
Here is: https://drive.google.com/drive/folders/1m5vcFRbmSvDLUG381B0w0QDiaa2BqEB4?usp=sharing