Downloads

Firmware for Kingroon KP3 (KP3-3DP180) to DOWNLOAD.  Kingroon KP3 3D Printer Specification Model Kingroon KP3-3DP180 3D printer Print Volumn 180*180*180mm   Firmware for Kingroon KP3S 2.0 with red extruder to DOWNLOAD.  

In this article, we'll guide you through to work out the best Cura profile for our Kingroon KP3S 3D printer. The profile would cover key values in Cura settings for the print of the most common 3D print material PLA,...

We will show you how to turn your Kingroon KP3S 3D printer into a powerful laser machine, so that you can switch its mode to carve things anytime. And it is quite easy, what you need to do is buying...

UPDATE: This tutorial ha been updated on 2022, please check the below videos and get the latest firmware to use.   NOT MARLIN | How to Enable Auto Bed Leveling  Feature on KINGROON KP3S 3D Printers https://youtu.be/s2ZiibBKVKI 2022/02/18   【Firmware...

Packaging List of Kingroon KP5L 3D Printer Assembly Instruction of Kingroon KP5L DIY Version Step 1. Fix the two Z-axis on the bottom panel with M5*20 screws, as show below.    Step 2. Take the top aluminum part and the...

A lot of people have difficulty in printing TPU filament. As a 3D printer with direct extruder, Kingroon KP3S has advantanges in printing soft 3d print filament, like TPU.  Features of TPU Filament Filament First of all, you need to...

Upgrade your Kingroon KP5L (Full DIY version) 3D printers or Kingroon KP5L (Half-assembled Version) 3D printers with BL Touch or 3D Touch auto leveling sensor.  First, get the printable fix frame for the BLTouch, which you could install the BLTouch on the extruder head. ...

Kingroon KP5M Bed Leveling Step 1. Click "Leveling" to adjust the distance between the nozzle and heatbed.  Step 2. Adjust the height of the Z-axis limit switch to set the distance between the nozzle and the platform.  Step 3. Adjust...

Kingroon KP5M X/Z Axis Assembly Put the X/Z axis vertically on the Kingroon KP5M printer base. (as shown in the picture) Tighten and secure X/Z axis to the printer base from the printer bottom using four M5*35 screws.  Cable Connection...